Home
Model: LP-650
Applications: WPC flooring, LVP flooring, LVT flooring, Vinyl and PVC flooring
Features: Revolutionary design to cut WPC and LVP flooring. The blade can be pulled out of the blade holder to make a notch cut without changing the blade.


Model: LP-330
Applications: WPC flooring, LVP flooring, LVT flooring, Vinyl and PVC flooring
Features: Revolutionary design to cut WPC and LVP flooring. The blade can be pulled out of the blade holder to make a notch cut without changing the blade.


Model: TC-230
Applications: Engineered wood flooring, laminate flooring, WPC and LVP flooring,
Features: 9" cutting width for engineered wood, laminate, WPC, and LVP 7/8" cutting depth for straight cuts and 5/8" cutting depth for bevel cuts Cuts at 90°, 45°, 30° and 22.5° on MDF/Pine baseboard and shoe molding The end of the table can be moved up and down to increase or decrease 1-2° Quick cutting angle adjustment
Model: LT-180
Applications: PVC, Vinyl flooring
Features:It features a 3 mm-wide flat steel blade to cut up to 6 mm thick PVC / Vinyl flooring. It cuts 150mm (6 inch) wide PVC flooring with one cut. It can also make cross cuts, free angle cuts and lengthwise cuts.


Model: LX-200
Applications: Parquet, Laminate & Engineered Flooring, LVT and Vinyl Flooring
Features: Features an extruded aluminum base with extension legs, a sharp 4 mm thick tungsten steel blade which can be sharpened and replaced, which provides an easy and clean cutting edge.


Model: LX-230
Applications: Parquet, Laminate & Engineered Flooring, LVT and Vinyl Flooring
Features: Features an extruded aluminum base with extension legs, a sharp 4 mm thick tungsten steel blade which can be sharpened and replaced, which provides an easy and clean cutting edge.


Model: MR-630
Applications: Carpet Tile, Laminate, LVT and Vinyl Flooring
Features: Features an extruded aluminum base, a sharp 4 mm thick tungsten blade, which can be sharpened and replaced, which provides an easy and clean cutting edge on floor planks. The maximum cutting length is 630 mm (25 inch), and maximum cutting depth is 16 mm ( 5/8 inch).

Model: LD-215
Applications: Laminate Flooring, Fiber Board, Fiber Cement Board
Features: Steel base. A flat 5mm thick steel blade makes 215 mm (8-1/2 inch) cuts on floor planks with one cut.



Model: PL-215
Applications: Laminate Flooring, Fiber Board, Fiber Cement Board
Features: Aluminum and steel tube base. A flat 5mm thick steel blade makes 215 mm (8-1/2 inch) cuts on floor planks with one cut.




Copyright© 2015 D Cut Products Inc.